KJN ENTERPRISES
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to KJN ENTERPRISES
Mechanical Thermostat
PRODUCT OVERVIEW
Cabinet Panel Cooler Accessories are available with a standard two-way normally closed solenoid valve and thermostat kit Model 90015 (120V) or Model 90016 (240V). This limits the flow of air only when required. The thermostat is factory set at 95°F (35°C) and will normally hold +/- 2°F (1°C) inside the enclosure. It is rated 24V-240V, 50/60Hz. Ul recognized and CSA approved.
Thermostat And Solenoid Valve Kit
This kit comes complete with a solenoid valve, thermostat, and a resistor. The resistor is included should you encounter rapid temperature fluctuations in the control panel causing the solenoid to cycle on and off to quickly (chattering). The resistor is installed (if needed) across the leads of the thermostat and prevents chattering by dampening the thermo switch sensitivity.
Electronic Temperature Control
PRODUCT OVERVIEW
Electronic Thermostat ELC (Electronic Control Digital Thermostat) is a way for precise control of one or two Nex Flow™ Frigid-X™ panel coolers.
Supply Voltage: AC120-240V (24V on request)
Sampling Rate: 4/sec (almost double that of nearest competitor)
Accuracy: 0.25% of full-scale
50° to 100°C measuring range
NEMA 4-4X Enclosure (ABS/PC), ULC approved – it is accepted anywhere in the world – Lexan door: U94-V-0
Standard unit comes with one solenoid valve
°F or °C and easily switchable back and forth.
3 Outputs: Two relay outputs and one with PID, 1SSR output with PID to control external SSR
It has two Alarm settings for the two output relays so you can set two different temperatures to control two different solenoids for two separate coolers (and can be used to control anything electrical)
AutoTune Mode for quick set ups
Standard unit comes with one solenoid valve, but it can operate two units and also complete additional tasks
Pneumatic Water Separator
PRODUCT OVERVIEW
The "Liquid Super Separator" is a new concept of a pneumatic mist remover without filter element. The "Element Free Pneumatic Water Separator" uses a special centrifugal technique with "radial multi-nozzles" that is world patent pending and makes it possible to reject liquid mist (water and oil) to 99.9%! This pneumatic mist separator is virtually maintenance free, as there is no need to replace any filter element. A standard traditional filter with an element and automatic drain may be placed downstream to control micron size but the high liquid and mist removal of the separator will keep it clean and it may not require element replacement for an extended period of time. Maintains extremely low pressure drop
Rigid Flex Hose
PRODUCT OVERVIEW
The unique Nex Flow RIGID FLEX Hose is an all stainless steel hose that does not break after a few bends like competitive rubber hoses with simple copper inserts. It is resistant to creep and crimping. Its all stainless construction allows is use in any difficult environment.
The Nex Flow RIGID FLEX Hose is used to flex, direct and then hold in place air nozzles, air jets and other small blow off products TM TM such as our Model 40001 adjustable air amplifier and 3" X-Stream Air Blade Air Knife. The RIGID FLEX Hose can also be used with liquid spray jets.
The rigid flex hose is available in three different sizes 6" (152 mm), 12" (304 mm) and 18"(457 mm) and in two configurations – 1/4? male NPT welded end connection both ends or 1/4" male NPT welded connection one end and female NPT welded connection other end.
Temperature Sensing Labels
PRODUCT OVERVIEW
High Temperature Warning Sticker provides a qualitative monitoring of the temperature inside of electrical and electronic control panels. High temperature inside a control panel can be damaging to internal equipment and lead to unplanned shutdown of factory operations. The label provides for an effective warning with a color change indicator to ORANGE and a danger warning with a color change indicator to RED. Color change is reversible so when the temperature problem is corrected, the label can continue to be used indefinitely. While it is a qualitative measurement only, it provides an ideal cautionary monitoring of possible temperature problems within a control panel.
Mounting System For Air Blade Air Knives And Amplifiers
PRODUCT OVERVIEW
NEX FLOW MOUNTING SYSTEM FOR AIR BLADE AIR KNIVES & AMPLIFIERS – Flexible and Durable
Mounting Systems for air knives and amplifiers provide a convenient and flexible way to utilize the products for blow-off and cooling applications. All Mounting Systems are made of powder coated steel. One knob controls the infinite flexibility of the system and secures it in place after the air knife or amplifier is properly positioned. Optional magnetic base can secure it to a magnet accepting platform. Rugged and secure positioning.
Secure air knives in place quickly and easily with precision mounting.
Air Blade Air Knife System comes complete with powder coated brackets and stainless steel mounting screws along with the mounting unit itself. Optional magnetic base, otherwise can secure by threading to a surface.
Air Amplifiers can also be securely and accurately placed using the mounting systems.
Standard Model AM10, AM20, and AM40 as well as adjustable Model 40001, and 40002 Air Amplifiers can also be mounted using the mounting arm. TM As with the Air Blade Air Knife System an optional magnetic base can be provided or the unit can be secured by threading to a surface.
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
